Modul:Protection banner

Diese Vorlage wird auf 36098 Seiten verwendet

Um große Unterbrechungen und unnötige Serverauslastung zu vermeiden, solltest du Änderungen an anderer Stelle testen, indem du beispielsweise den Quellcode dieser Vorlage kopierst und in den Benutzerbereich oder in die Sandbox einfügst. Erwäge, deine Änderungen auf der Diskussionsseite vorzuschlagen, bevor du diese Vorlage bearbeitest.

This module is subject to page protection. It is a highly visible module in use by a very large number of pages, or is substituted very frequently. Because vandalism or mistakes would affect many pages, and even trivial editing might cause substantial load on the servers, it is protected from editing.

Diese Vorlage benutzt Module:Protection banner/config, Module:File link, Module:Effective protection level, Skripte geschrieben in der Programmiersprache Lua. Bitte informiere dich dort, wenn du mehr über die Sprache und ihren Einsatz erfahren willst. Diese Vorlagen sollte im Regelfall nicht ersetzt werden.

This module creates protection banners and padlock icons that are placed at the top of protected pages.

Usage

Most users will not need to use this module directly. For adding protection templates to pages you can use the {{pp}} template, or you may find it more convenient to use one of the more specific protection templates in the table below.

From wikitext

{{#invoke:Protection banner|main
| 1        = reason
| small    = yes/no
| action   = action
| date     = protection date
| user     = username
| section  = talk page section name
| category = no
}}

The #invoke syntax can be used for creating protection templates more specific than {{pp}}. For example, it is possible to create a protection template which always shows a padlock icon by using the code {{#invoke:Protection banner|main|small=yes}}. Pages which call this template will still be able to use other arguments, like action. However, this only works one level deep; a page calling a template which calls another template containing the above code will not automatically be able to use parameters like action.

Note: You should no longer specify the expiry, as it is automatically retrieved in all cases.

From Lua

First, load the module.

local mProtectionBanner = require('Module:Protection banner')

Then you can make protection banners by using the _main function.

mProtectionBanner._main(args, cfg, titleObj)

args is a table of arguments to pass to the module. For possible keys and values for this table, see the parameters section. The cfg and titleObj variables are intended only for testing; cfg specifies a customised config table to use instead of Module:Protection banner/config, and titleObj specifies a mw.title object to use instead of the current title. args, cfg and titleObj are all optional.

Parameters

All parameters are optional.

1 – the reason that the page was protected. If set, this must be one of the values listed in the reasons table.
small – if set to "yes", "y", "1", or "true", a padlock icon is generated instead of a full protection banner.
action – the protection action. Must be one of "edit" (for normal protection), "move" (for move-protection) or "autoreview" (for pending changes). The default value is "edit".
date – the protection date. This must be valid input to the second parameter of the #time parser function. This argument has an effect for reasons that use the PROTECTIONDATE parameter in their configuration. As of July 2014, those were the "office" and "reset" reasons.
user – the username of the user to generate links for. As of July 2014, this only has an effect when the "usertalk" reason is specified.
section – the section name of the protected page's talk page where discussion is taking place. This works for most, but not all, values of reason.
category – categories are suppressed if this is set to "no", "n", "0", or "false".
catonly – if set to "yes", "y", "1", or "true", will only return the protection categories, and not return the banner or padlock. This has no visible output.

Reasons

The following table contains the available reasons, plus the actions for which they are available.

Reason	Action	Description
blp	edit	For pages protected to promote compliance with the biographies of living persons policy
dispute	edit	For pages protected due to editing disputes
dmca	edit	For pages protected by the Wikimedia Foundation due to Digital Millennium Copyright Act takedown requests
ecp	edit	For articles in topic areas authorized by ArbCom or meets the criteria for community use
mainpage	edit	For pages protected for being displayed on the Main Page
office	edit	For pages protected by the Wikimedia Foundation
reset	edit	For pages protected by the Wikimedia Foundation and "reset" to a bare-bones version
sock	edit	For pages protected due to sock puppetry
template	edit	For high-risk templates and Lua modules
usertalk	edit	For pages protected against disruptive edits by a particular user
vandalism	edit	For pages protected against vandalism
dispute	move	For pages protected against page moves due to disputes over the page title
vandalism	move	For pages protected against page-move vandalism

Errors

Below is a list of some of the common errors that this module can produce, and how to fix them.

Invalid protection date

Error: invalid protection date ("abc")

This error is produced if you supply a |date= parameter value that is not recognised as a valid date by the #time parser function. If in doubt, you can just use a date in the format "dd Month YYYY", e.g. "2 Januar 2025". To see a full range of valid inputs, see the #time documentation (only the first parameter, the format string, may be specified).

Invalid action

Error: invalid action ("abc")

This error is produced if you specify an invalid protection action. There are only three valid actions: edit (the default, for normal protection), move (for move-protection), and autoreview (for pending changes). This should only be possible if you are using a template that supports manually specifying the protection action, such as {{pp}}, or if you are using #invoke directly. If this is not the case, please leave a message on Module talk:Protection banner.

Reasons cannot contain the pipe character

Error: reasons cannot contain the pipe character ("|")

This error is produced if you specify a reason using the |1= parameter that includes a pipe character ("|"). Please check that you are not entering the {{!}} template into this parameter by mistake. The pipe character is disallowed as the module uses it internally. A list of valid reasons can be seen in the reasons section.

Other errors

If you see an error other than the ones above, it is likely to either be a bug in the module or mistake in the configuration. Please post a message about it at Module talk:Protection banner.

Technical details

This module uses configuration data from Module:Protection banner/config. Most of the module's behaviour can be configured there, making it easily portable across different wikis and different languages.

General test cases for the module can be found at Module:Protection banner/testcases, and test cases specific to enwiki's config can be found at Module:Protection banner/config/testcases.

Bug reports and feature requests should be made on the module's talk page.

-- This module implements {{pp-meta}} and its daughter templates such as
-- {{pp-dispute}}, {{pp-vandalism}} and {{pp-sock}}.

local categories = {
	-- The key strings follow this format:
	-- type, level, ns, reason, expiry
	['edit-autoconfirmed-user-all-all'] = 'Wikipedia semi-protected user and user talk pages',
	['edit-autoconfirmed-project-all-all'] = 'Semi-protected project pages',
	['edit-autoconfirmed-file-all-all'] = 'Semi-protected images',
	['edit-autoconfirmed-template-all-all'] = 'Wikipedia semi-protected templates',
	['edit-autoconfirmed-portal-all-all'] = 'Semi-protected portals',
	['edit-autoconfirmed-talk-all-all'] = 'Semi-protected talk pages',
	['edit-autoconfirmed-all-vandalism-all'] = 'Wikipedia pages semi-protected against vandalism',
	['edit-sysop-user-all-all'] = 'Wikipedia protected user and user talk pages',
	['edit-sysop-file-all-all'] = 'Protected images',
	['edit-sysop-project-all-all'] = 'Protected project pages',
	['edit-sysop-template-all-all'] = 'Wikipedia protected templates',
	['edit-sysop-talk-all-all'] = 'Protected talk pages',
	['edit-sysop-all-vandalism-all'] = 'Wikipedia pages protected against vandalism',
	['edit-autoconfirmed-all-dispute-all'] = 'Wikipedia pages semi-protected due to dispute',
	['edit-sysop-all-dispute-all'] = 'Wikipedia pages protected due to dispute',
	['move-sysop-all-dispute-all'] = 'Wikipedia pages move-protected due to dispute',
	['move-sysop-user-all-all'] = 'Wikipedia move-protected user and user talk pages',
	['move-sysop-project-all-all'] = 'Wikipedia move-protected project pages',
	['move-sysop-portal-all-all'] = 'Wikipedia move-protected portals',
	['move-sysop-all-vandalism-all'] = 'Wikipedia pages move-protected due to vandalism',
	['edit-autoconfirmed-template-all-all'] = 'Wikipedia semi-protected templates',
	['move-sysop-template-all-all'] = 'Wikipedia move-protected templates',
	['edit-all-template-all-all'] = 'Wikipedia protected templates',
	['move-sysop-portal-all-all'] = 'Wikipedia move-protected portals',
	['edit-autoconfirmed-all-sock-all'] = 'Wikipedia pages semi-protected from banned users',
	['edit-sysop-all-sock-all'] = 'Wikipedia pages protected from banned users',
	['edit-autoconfirmed-all-blp-temp'] = 'Wikipedia temporarily semi-protected biographies of living people',
	['edit-sysop-all-blp-temp'] = 'Wikipedia temporarily protected biographies of living people',
	['edit-autoconfirmed-all-blp-all'] = 'Wikipedia indefinitely semi-protected biographies of living people',
	['edit-sysop-all-blp-all'] = 'Wikipedia indefinitely protected biographies of living people',
	['edit-autoconfirmed-all-all-indef'] = 'Wikipedia indefinitely semi-protected pages',
	['edit-autoconfirmed-category-all-all'] = 'Wikipedia semi-protected categories',
	['edit-sysop-category-all-all'] = 'Wikipedia protected categories',
	['move-sysop-talk-all-all'] = 'Wikipedia move-protected talk pages',
	['move-sysop-all-all-indef'] = 'Wikipedia indefinitely move-protected pages',
	['edit-autoconfirmed-all-all-all'] = 'Wikipedia semi-protected pages',
	['move-sysop-all-all-all'] = 'Wikipedia move-protected pages',
	['pc-autoconfirmed-all-all-all'] = 'Wikipedia pending changes protected pages (level 1)',
	['pc-reviewer-all-all-all'] = 'Wikipedia pending changes protected pages (level 2)',
	['all-all-all-office-all'] = 'Wikipedia Office-protected pages',
	['all-all-all-all-all'] = 'Wikipedia protected pages',
}

local nskeys = {
	[2] = 'user',
	[3] = 'user',
	[4] = 'project',
	[6] = 'file',
	[10] = 'template',
	[12] = 'project',
	[14] = 'category',
	[100] = 'portal',
}

local behaviors = {
	vandalism = 'namespaceFirst',
	dispute = 'reasonFirst',
	blp = 'reasonFirst',
	sock = 'reasonFirst',
	office = 'reasonFirst',
}

--[[
-- Not currently used
local error_categories = {
	incorrect = 'Wikipedia pages with incorrect protection templates',
	no_expiry = 'Wikipedia protected pages without expiry',
	create = 'Wikipedia pages tagged as create-protected',
	template = 'Wikipedia template-protected pages other than templates and modules'
}
--]]

--------------------------------------------------------------------------------
-- Main functions
--------------------------------------------------------------------------------

-- Define often-used functions as local variables.
local tconcat = table.concat
local tinsert = table.insert
local tremove = table.remove
local ceil = math.ceil
local format = string.format

local function toTableEnd(t, pos)
	-- Sends the value at position pos to the end of array t, and shifts the
	-- other items down accordingly.
	return tinsert(t, tremove(t, pos))
end

local p = {}

function p.matchNamespace(ns)
	-- Matches a namespace number to a string that can be passed to the
	-- namespace parameter of p.getCategoryName.
	if not ns or type(ns) ~= 'number' then
		return nil
	end
	local nskey = nskeys[ns]
	if not nskey and ns % 2 == 1 then
			nskey = 'talk'
	end
	return nskey
end

function p.getCategoryName(cats, protType, protLevel, namespace, reason, expiry)
	--[[
	-- Gets a category name from the category table, given a combination of
	-- the protection type, the protection level, the namespace number, the
	-- reason for protection, and the expiry date.
	--]]
	cats = cats or categories

	--[[
	-- Define the initial order to test properties in. The subtable position
	-- is the order the properties will be tested in, and the pos value in
	-- each subtable is the position of the value in the category key.
	--]]
	local properties = {
		{pos = 5, val = expiry},
		{pos = 3, val = p.matchNamespace(namespace)},
		{pos = 4, val = reason},
		{pos = 2, val = protLevel},
		{pos = 1, val = protType}
	}

	--[[
	-- Validate reason, and if it is specified as a "namespaceFirst" reason,
	-- move the namespace subtable to the end of the properties table.
	-- This is necessary to accommodate reasons like "vandalism", as the old
	-- {{pp-vandalism}} template used namespace categories rather than
	-- vandalism categories if they were available.
	--]]
	local behavior
	if not reason then
		behavior = 'reasonFirst'
	else
		behavior = behaviors[reason]
	end
	if behavior == 'namespaceFirst' then
		toTableEnd(properties, 2) -- move namespace to end
	elseif behavior == 'reasonFirst' then
		toTableEnd(properties, 3) -- move reason to end
	else
		error(reason .. ' is not a valid reason')
	end

	--[[
	-- Define the attempt order. Properties with no value defined are moved
	-- to the end, where they will later be given the value "all". This is
	-- to cut down on the number of table lookups in the cats table, which
	-- grows exponentially with the number of properties with valid values.
	-- We keep track of the number of active properties with the noActive
	-- parameter.
	--]]
	local active, inactive = {}, {}
	for i, t in ipairs(properties) do
		if t.val then
			active[#active + 1] = t
		else
			inactive[#inactive + 1] = t
		end
	end
	local noActive = #active
	local attemptOrder = active
	for i, t in ipairs(inactive) do
		attemptOrder[#attemptOrder + 1] = t
	end

	--[[
	-- Check increasingly generic key combinations until we find a match.
	-- If a specific category exists for the combination of properties
	-- we are given, that match will be found first. If not, we keep
	-- trying different key combinations until we match using the key
	-- "all-all-all-all-all".
	--
	-- To generate the keys, we index the property subtables using a
	-- binary matrix with indexes i and j. j is only calculated up to
	-- the number of active properties. For example, if there were three
	-- active properties, the matrix would look like this, with 0
	-- corresponding to the string "all", and 1 corresponding to the
	-- val field in the property table:
	-- 
	--   j 1  2  3
	-- i  
	-- 1   1  1  1
	-- 2   0  1  1
	-- 3   1  0  1
	-- 4   0  0  1
	-- 5   1  1  0
	-- 6   0  1  0
	-- 7   1  0  0
	-- 8   0  0  0
	-- 
	-- Values of j higher than the number of active properties are set
	-- to the string "all".
	--
	-- A key for the category table is constructed for each value of i.
	-- The correct position of the value in the key is determined by the
	-- pos field in the property table.
	--]]
	for i = 1, 2^noActive do
		local key = {}
		for j, t in ipairs(attemptOrder) do
			local pos = t.pos
			local val = t.val
			if j > noActive then
				key[pos] = 'all'
			else
				local quotient = i / 2 ^ (j - 1)
				quotient = ceil(quotient)
				if quotient % 2 == 1 then
					key[pos] = val
				else
					key[pos] = 'all'
				end
			end
		end
		key = tconcat(key, '-')
		mw.log(key) -- for debugging
		local attempt = cats[key]
		if attempt then
			return attempt
		end
	end
	error('No category match found; please define the category for key "all-all-all-all-all"')
end

function p.renderPadlock(data)
	-- Renders the padlock seen in the top-right-hand corner or protected pages,
	-- using the data provided in the data table.
	local root = mw.html.create('div')
	root
		:addClass('metadata topicon nopopups')
		:attr('id', 'protected-icon')
		:css{display = 'none', right = data.right or '55px'}
		:wikitext(format(
			'[[Image:%s|20px|link=%s|%s|alt=%s]]',
			data.image, data.iconLink, data.iconText, data.altText
		))
	return tostring(root)
end

return p