Modul:Protection banner

Aus skandinavien-wiki.net
Version vom 27. Juni 2014, 02:49 Uhr von wpen>Mr. Stradivarius (add template protection tracking category)
Gnome-emblem-important.svg
Diese Vorlage wird auf 36098 Seiten verwendet
Um große Unterbrechungen und unnötige Serverauslastung zu vermeiden, solltest du Änderungen an anderer Stelle testen, indem du beispielsweise den Quellcode dieser Vorlage kopierst und in den Benutzerbereich oder in die Sandbox einfügst. Erwäge, deine Änderungen auf der Diskussionsseite vorzuschlagen, bevor du diese Vorlage bearbeitest.

This module creates protection banners and padlock icons that are placed at the top of protected pages.

Usage

Most users will not need to use this module directly. For adding protection templates to pages you can use the {{pp}} template, or you may find it more convenient to use one of the more specific protection templates in the table below.

From wikitext

{{#invoke:Protection banner|main
| 1        = reason
| small    = yes/no
| action   = action
| date     = protection date
| user     = username
| section  = talk page section name
| category = no
}}

The #invoke syntax can be used for creating protection templates more specific than {{pp}}. For example, it is possible to create a protection template which always shows a padlock icon by using the code {{#invoke:Protection banner|main|small=yes}}. Pages which call this template will still be able to use other arguments, like action. However, this only works one level deep; a page calling a template which calls another template containing the above code will not automatically be able to use parameters like action.

Note: You should no longer specify the expiry, as it is automatically retrieved in all cases.

From Lua

First, load the module.

local mProtectionBanner = require('Module:Protection banner')

Then you can make protection banners by using the _main function.

mProtectionBanner._main(args, cfg, titleObj)

args is a table of arguments to pass to the module. For possible keys and values for this table, see the parameters section. The cfg and titleObj variables are intended only for testing; cfg specifies a customised config table to use instead of Module:Protection banner/config, and titleObj specifies a mw.title object to use instead of the current title. args, cfg and titleObj are all optional.

Parameters

All parameters are optional.

  • 1 – the reason that the page was protected. If set, this must be one of the values listed in the reasons table.
  • small – if set to "yes", "y", "1", or "true", a padlock icon is generated instead of a full protection banner.
  • action – the protection action. Must be one of "edit" (for normal protection), "move" (for move-protection) or "autoreview" (for pending changes). The default value is "edit".
  • date – the protection date. This must be valid input to the second parameter of the #time parser function. This argument has an effect for reasons that use the PROTECTIONDATE parameter in their configuration. As of July 2014, those were the "office" and "reset" reasons.
  • user – the username of the user to generate links for. As of July 2014, this only has an effect when the "usertalk" reason is specified.
  • section – the section name of the protected page's talk page where discussion is taking place. This works for most, but not all, values of reason.
  • category – categories are suppressed if this is set to "no", "n", "0", or "false".
  • catonly – if set to "yes", "y", "1", or "true", will only return the protection categories, and not return the banner or padlock. This has no visible output.

Reasons

The following table contains the available reasons, plus the actions for which they are available.

Reason Action Description
blp edit For pages protected to promote compliance with the biographies of living persons policy
dispute edit For pages protected due to editing disputes
dmca edit For pages protected by the Wikimedia Foundation due to Digital Millennium Copyright Act takedown requests
ecp edit For articles in topic areas authorized by ArbCom or meets the criteria for community use
mainpage edit For pages protected for being displayed on the Main Page
office edit For pages protected by the Wikimedia Foundation
reset edit For pages protected by the Wikimedia Foundation and "reset" to a bare-bones version
sock edit For pages protected due to sock puppetry
template edit For high-risk templates and Lua modules
usertalk edit For pages protected against disruptive edits by a particular user
vandalism edit For pages protected against vandalism
dispute move For pages protected against page moves due to disputes over the page title
vandalism move For pages protected against page-move vandalism

Errors

Below is a list of some of the common errors that this module can produce, and how to fix them.

Invalid protection date

Error: invalid protection date ("abc")

This error is produced if you supply a |date= parameter value that is not recognised as a valid date by the #time parser function. If in doubt, you can just use a date in the format "dd Month YYYY", e.g. "5 April 2024". To see a full range of valid inputs, see the #time documentation (only the first parameter, the format string, may be specified).

Invalid action

Error: invalid action ("abc")

This error is produced if you specify an invalid protection action. There are only three valid actions: edit (the default, for normal protection), move (for move-protection), and autoreview (for pending changes). This should only be possible if you are using a template that supports manually specifying the protection action, such as {{pp}}, or if you are using #invoke directly. If this is not the case, please leave a message on Module talk:Protection banner.

Reasons cannot contain the pipe character

Error: reasons cannot contain the pipe character ("|")

This error is produced if you specify a reason using the |1= parameter that includes a pipe character ("|"). Please check that you are not entering the {{!}} template into this parameter by mistake. The pipe character is disallowed as the module uses it internally. A list of valid reasons can be seen in the reasons section.

Other errors

If you see an error other than the ones above, it is likely to either be a bug in the module or mistake in the configuration. Please post a message about it at Module talk:Protection banner.

Technical details

This module uses configuration data from Module:Protection banner/config. Most of the module's behaviour can be configured there, making it easily portable across different wikis and different languages.

General test cases for the module can be found at Module:Protection banner/testcases, and test cases specific to enwiki's config can be found at Module:Protection banner/config/testcases.

Bug reports and feature requests should be made on the module's talk page.


-- This module implements {{pp-meta}} and its daughter templates such as
-- {{pp-dispute}}, {{pp-vandalism}} and {{pp-sock}}.

-- Initialise necessary modules.
require('Module:No globals')
local class = require('Module:Middleclass').class
local mFileLink = require('Module:File link')
local mProtectionLevel = require('Module:Effective protection level')
local yesno = require('Module:Yesno')

-- Lazily initialise modules and objects we don't always need.
local mArguments, mMessageBox, lang

--------------------------------------------------------------------------------
-- Config class
--------------------------------------------------------------------------------

local Config = class('Config')

function Config:initialize(data)
	data = data or mw.loadData('Module:Protection banner/config')
	self._cfg = data.cfg
	self._msg = data.msg
	self._bannerConfigTables = {}
end

function Config:getBannerConfig(protectionStatusObj)
	if self._bannerConfigTables[protectionStatusObj] then
		return self._bannerConfigTables[protectionStatusObj]
	else
		local ret = {}
		local cfg = self._cfg
		local action = protectionStatusObj:getAction()
		local level = protectionStatusObj:getLevel()
		local reason = protectionStatusObj:getReason()
		local fields = {
			'text',
			'explanation',
			'tooltip',
			'alt',
			'image'
		}
		local configTables = {}
		if cfg.banners[action] then
			configTables[#configTables + 1] = cfg.banners[action][reason]
		end
		if cfg.defaultBanners[action] then
			configTables[#configTables + 1] = cfg.defaultBanners[action][level]
			configTables[#configTables + 1] = cfg.defaultBanners[action].default
		end
		configTables[#configTables + 1] = cfg.masterBanner
		for i, field in ipairs(fields) do
			for j, t in ipairs(configTables) do
				if t[field] then
					ret[field] = t[field]
					break
				end
			end
		end
		self._bannerConfigTables[protectionStatusObj] = ret
		return ret
	end
end

function Config:getConfigTable(key)
	local blacklist = {
		banners = true,
		defaultBanners = true,
		masterBanner = true
	}
	if not blacklist[key] then
		return self._cfg[key]
	else
		return nil
	end
end

function Config:getMessage(key)
	return self._msg[key]
end

--------------------------------------------------------------------------------
-- ProtectionStatus class
--------------------------------------------------------------------------------

local ProtectionStatus = class('ProtectionStatus')

function ProtectionStatus:initialize(args, configObj, titleObj)
	-- Set action
	do
		local actions = {
			create = true,
			edit = true,
			move = true,
			autoreview = true
		}
		if args.action and actions[args.action] then
			self._action = args.action
		else
			self._action = 'edit'
		end
	end

	-- Set level
	do
		local level = mProtectionLevel._main(self._action, titleObj)
		if level == 'accountcreator' then
			-- Lump titleblacklisted pages in with template-protected pages,
			-- since templateeditors can do both.
			level = 'templateeditor'
		end
		if self._action == 'move' and level == 'autoconfirmed' then
			-- Users need to be autoconfirmed to move pages anyway, so treat
			-- semi-move-protected pages as unprotected.
			level = '*'
		end
		self._level = level or '*'
	end

	-- Validation function for the expiry and the protection date
	local function validateDate(date, dateType)
		lang = lang or mw.language.getContentLanguage()
		local success, expiry = pcall(lang.formatDate, lang, 'U', args.expiry)
		expiry = tonumber(expiry)
		if success and expiry then
			return expiry
		else
			return string.format(
				'<strong class="error">Error: invalid %s ("%s")</strong>',
				dateType,
				tostring(args.expiry)
			)
		end
	end

	-- Set expiry
	if args.expiry then
		local indefStrings = configObj:getConfigTable('indefStrings')
		if indefStrings[args.expiry] then
			self._expiry = 'indef'
		elseif type(args.expiry) == 'number' then
			self._expiry = args.expiry
		else
			self._expiry = validateDate(args.expiry, 'expiry date')
		end
	end

	-- Set reason
	do
		local reason = args.reason or args[1]
		if reason then
			self._reason = reason:lower()
		end
	end

	-- Set protection date
	self._protectionDate = validateDate(args.date, 'protection date')
end

function ProtectionStatus:getAction()
	return self._action
end

function ProtectionStatus:getLevel()
	return self._level
end

function ProtectionStatus:isProtected()
	return self._level ~= '*'
end

function ProtectionStatus:getReason()
	return self._reason
end

function ProtectionStatus:getExpiry()
	return self._expiry
end

function ProtectionStatus:getProtectionDate()
	return self._protectionDate
end

--------------------------------------------------------------------------------
-- Blurb class
--------------------------------------------------------------------------------

local Blurb = class('Blurb')

function Blurb:initialize(configObj, protectionStatusObj, titleObj)
	self._configObj = configObj
	self._protectionStatusObj = protectionStatusObj
	self._bannerConfig = configObj:getBannerConfig(protectionStatusObj)
	self._titleObj = titleObj
end

-- Static methods --

function Blurb.makeFullUrl(page, query, display)
	local url = mw.uri.fullUrl(page, query)
	url = tostring(url)
	return string.format('[%s %s]', url, display)
end

function Blurb.formatDate(num)
	-- Formats a Unix timestamp into dd Month, YYYY format.
	lang = lang or mw.language.getContentLanguage()
	local success, date = pcall(
		lang.formatDate,
		lang,
		'j F Y',
		'@' .. tostring(num)
	)
	if success then
		return date
	end
end

-- Private methods --

function Blurb:_getExpandedMessage(msg)
	local msg = self._configObj:getMessage(msg)
	return self:_substituteParameters(msg)
end

function Blurb:_substituteParameters(msg)
	if not self._params then
		local params, parameterFuncs = {}, {}
		setmetatable(params, {
			__index = function (t, k)
				local param
				if parameterFuncs[k] then
					param = parameterFuncs[k](self)
				end
				param = param or ''
				params[k] = param
				return param
			end
		})

		parameterFuncs.CURRENTVERSION     = self._makeCurrentVersionParameter
		parameterFuncs.DELETIONDISCUSSION = self._makeDeletionDiscussionParameter
		parameterFuncs.DISPUTEBLURB       = self._makeDisputeBlurbParameter
		parameterFuncs.DISPUTESECTION     = self._makeDisputeSectionParameter
		parameterFuncs.EDITREQUEST        = self._makeEditRequestParameter
		parameterFuncs.EXPIRY             = self._makeExpiryParameter
		parameterFuncs.EXPLANATIONBLURB   = self._makeExplanationBlurbParameter
		parameterFuncs.INTROBLURB         = self._makeIntroBlurbParameter
		parameterFuncs.OFFICEBLURB        = self._makeOfficeBlurbParameter
		parameterFuncs.PAGETYPE           = self._makePagetypeParameter
		parameterFuncs.PROTECTIONBLURB    = self._makeProtectionBlurbParameter
		parameterFuncs.PROTECTIONDATE     = self._makeProtectionDateParameter
		parameterFuncs.PROTECTIONLEVEL    = self._makeProtectionLevelParameter
		parameterFuncs.PROTECTIONLOG      = self._makeProtectionLogParameter
		parameterFuncs.RESETBLURB         = self._makeResetBlurbParameter
		parameterFuncs.TALKPAGE           = self._makeTalkPageParameter
		parameterFuncs.TOOLTIPBLURB       = self._makeTooltipBlurbParameter
		parameterFuncs.VANDAL             = self._makeVandalTemplateParameter
		
		self._params = params
	end
	
	msg = msg:gsub('${(%u+)}', self._params)
	return msg
end

function Blurb:_makeCurrentVersionParameter()
	-- A link to the page history or the move log, depending on the kind of
	-- protection.
	local action = self._protectionStatusObj:getAction()
	local pagename = self._titleObj.prefixedText
	if action == 'move' then
		-- We need the move log link.
		return self.makeFullUrl(
			'Special:Log',
			{type = 'move', page = pagename},
			self:_getExpandedMessage('current-version-move-display')
		)
	else
		-- We need the history link.
		return self.makeFullUrl(
			pagename,
			{action = 'history'},
			self:_getExpandedMessage('current-version-edit-display')
		)
	end
end

function Blurb:_makeDeletionDiscussionLinkParameter()
	local deletionDiscussionPage = self._deletionDiscussionPage
	if deletionDiscussionPage then
		local display = self:_getExpandedMessage('deletion-discussion-link-display')
		return string.format('[[%s|%s]]', deletionDiscussionPage, display)
	end
end

function Blurb:_makeDisputeBlurbParameter()
	local expiry = self._protectionStatusObj:getExpiry()
	if type(expiry) == 'number' then
		return self:_getExpandedMessage('dispute-blurb-expiry')
	else
		return self:_getExpandedMessage('dispute-blurb-noexpiry')
	end
end

function Blurb:_makeDisputeSectionParameter()
	-- "disputes", with or without a section link
	local section = self._section
	local disputes = self:_getExpandedMessage('dispute-section-link-display')
	if section then
		return string.format(
			'[[%s:%s#%s|%s]]',
			mw.site.namespaces[self._titleObj.namespace].talk.name,
			self._titleObj.text,
			section,
			disputes
		)
	else
		return disputes
	end
end

function Blurb:_makeEditRequestParameter()
	local mEditRequest = require('Module:Submit an edit request')
	local action = self._protectionStatusObj:getAction()
	local level = self._protectionStatusObj:getLevel()
	
	-- Get the display message key.
	local key
	if action == 'edit' and level == 'autoconfirmed' then
		key = 'edit-request-semi-display'
	else
		key = 'edit-request-full-display'
	end
	local display = self:_getExpandedMessage(key)
	
	-- Get the edit request type.
	local requestType
	if action == 'edit' then
		if level == 'autoconfirmed' then
			requestType = 'semi'
		elseif level == 'templateeditor' then
			requestType = 'template'
		end
	end
	requestType = requestType or 'full'
	
	return mEditRequest.exportLinkToLua{type = requestType, display = display}
end

function Blurb:_makeExpiryParameter()
	local expiry = self._protectionStatusObj:getExpiry()
	if expiry == 'indef' then
		return nil
	elseif type(expiry) == 'number' then
		return Blurb.formatDate(expiry)
	elseif expiry then
		-- Expiry is an error string.
		return expiry
	end
end

function Blurb:_makeExplanationBlurbParameter()
	local action = self._protectionStatusObj:getAction()
	local level = self._protectionStatusObj:getLevel()
	local namespace = self._titleObj.namespace
	local isTalk = self._titleObj.isTalkPage

	-- @TODO: add semi-protection and pending changes blurbs
	local key
	if namespace == 8 then
		-- MediaWiki namespace
		key = 'explanation-blurb-full-nounprotect'
	elseif action == 'edit' and level == 'sysop' and not isTalk then
		key = 'explanation-blurb-full-subject'
	elseif action == 'move' then
		if isTalk then
			key = 'explanation-blurb-move-talk'
		else
			key = 'explanation-blurb-move-subject'
		end
	elseif action == 'create' then
		local xfd = self._deletionDiscussion
		if xfd then
			key = 'explanation-blurb-create-xfd'
		else
			key = 'explanation-blurb-create-noxfd'
		end
	else
		key = 'explanation-blurb-default'
	end
	return self:_getExpandedMessage(key)
end

function Blurb:_makeIntroBlurbParameter()
	local expiry = self._protectionStatusObj:getExpiry()
	if type(expiry) == 'number' then
		return self:_getExpandedMessage('intro-blurb-expiry')
	else
		return self:_getExpandedMessage('intro-blurb-noexpiry')
	end
end

function Blurb:_makeOfficeBlurbParameter()
	local protectionDate = self._protectionStatusObj:getProtectionDate()
	if protectionDate then
		return self:_getExpandedMessage('office-blurb-protectiondate')
	else
		return self:_getExpandedMessage('office-blurb-noprotectiondate')
	end
end

function Blurb:_makePagetypeParameter()
	local pagetypes = self._configObj:getConfigTable('pagetypes')
	local namespace = self._titleObj.namespace
	return pagetypes[namespace] or pagetypes.default or error('no default pagetype defined')
end

function Blurb:_makeProtectionBlurbParameter()
	local protectionBlurbs = self._configObj:getConfigTable('protectionBlurbs')
	local action = self._protectionStatusObj:getAction()
	local level = self._protectionStatusObj:getLevel()
	local msg
	if protectionBlurbs[action][level] then
		msg = protectionBlurbs[action][level]
	elseif protectionBlurbs[action].default then
		msg = protectionBlurbs[action].default
	elseif protectionBlurbs.edit.default then
		msg = protectionBlurbs.edit.default
	else
		error('no protection blurb defined for cfg.protectionBlurbs.edit.default')
	end
	return self:_substituteParameters(msg)
end

function Blurb:_makeProtectionDateParameter()
	local protectionDate = self._protectionStatusObj:getProtectionDate()
	if type(protectionDate) == 'number' then
		return Blurb.formatDate(protectionDate)
	else
		return protectionDate
	end
end

function Blurb:_makeProtectionLevelParameter()
	local protectionLevels = self._configObj:getConfigTable('protectionLevels')
	local action = self._protectionStatusObj:getAction()
	local level = self._protectionStatusObj:getLevel()
	local msg
	if protectionLevels[action][level] then
		msg = protectionLevels[action][level]
	elseif protectionLevels[action].default then
		msg = protectionLevels[action].default
	elseif protectionLevels.edit.default then
		msg = protectionLevels.edit.default
	else
		error('no protection level defined for cfg.protectionLevels.edit.default')
	end
	return self:_substituteParameters(msg)
end

function Blurb:_makeProtectionLogParameter()
	local action = self._protectionStatusObj:getAction()
	local pagename = self._titleObj.prefixedText
	if action == 'autoreview' then
		-- We need the pending changes log.
		return self.makeFullUrl(
			'Special:Log',
			{type = 'stable', page = pagename},
			self:_getExpandedMessage('pc-log-display')
		)
	else
		-- We need the protection log.
		return self.makeFullUrl(
			'Special:Log',
			{type = 'protect', page = pagename},
			self:_getExpandedMessage('protection-log-display')
		)
	end
end

function Blurb:_makeResetBlurbParameter()
	local protectionDate = self._protectionStatusObj:getProtectionDate()
	if protectionDate then
		return self:_getExpandedMessage('reset-blurb-protectiondate')
	else
		return self:_getExpandedMessage('reset-blurb-noprotectiondate')
	end
end

function Blurb:_makeTalkPageParameter()
	local section = self._section
	local display = self:_getExpandedMessage('talk-page-link-display')
	return string.format(
		'[[%s:%s#%s|%s]]',
		mw.site.namespaces[self._titleObj.namespace].talk.name,
		self._titleObj.text,
		section or 'top',
		display
	)
end

function Blurb:_makeTooltipBlurbParameter()
	local expiry = self._protectionStatusObj:getExpiry()
	if type(expiry) == 'number' then
		return self:_getExpandedMessage('tooltip-blurb-expiry')
	else
		return self:_getExpandedMessage('tooltip-blurb-noexpiry')
	end
end

function Blurb:_makeVandalTemplateParameter()
	local mVandalM = require('Module:Vandal-m')
	local username = self._username
	username = username or self._titleObj.baseText
	return mVandalM._main{username}
end

-- Public methods --

function Blurb:setDeletionDiscussionPage(page)
	self._deletionDiscussionPage = page
end

function Blurb:setUsername(username)
	self._username = username
end

function Blurb:setSection(section)
	self._section = section
end

function Blurb:makeReasonText()
	local msg = self._bannerConfig.text
	return self:_substituteParameters(msg)
end

function Blurb:makeExplanationText()
	local msg = self._bannerConfig.explanation
	return self:_substituteParameters(msg)
end

function Blurb:makeTooltipText()
	local msg = self._bannerConfig.tooltip
	return self:_substituteParameters(msg)
end

function Blurb:makeAltText()
	local msg = self._bannerConfig.alt
	return self:_substituteParameters(msg)
end

function Blurb:makeLinkText()
	local msg = self._bannerConfig.link
	return self:_substituteParameters(msg)
end

--------------------------------------------------------------------------------
-- BannerTemplate class
--------------------------------------------------------------------------------

local BannerTemplate = class('BannerTemplate')

function BannerTemplate:initialize(configObj)
	self._configObj = configObj
end

function BannerTemplate:setImageFilename(filename, action, level, namespace, expiry)
	if filename then
		self._imageFilename = filename
		return nil
	end
	
	if not action or not level then
		-- If the filename is not specified, we need the action and the level
		-- to find the image name. The namespace and the expiry are optional,
		-- however.
		return nil
	end

	-- Deal with special cases first.
	if (namespace == 10 or namespace == 828) -- Maybe we don't need the namespace check?
		and action == 'edit'
		and level == 'sysop'
		and not expiry
	then
		-- Fully protected modules and templates get the special red "indef"
		-- padlock.
		self._imageFilename = self._configObj:getMessage('image-filename-indef')
		return nil
	end
	
	-- Deal with regular protection types.
	local images = self._configObj:getConfigTable('images')
	if images[action] then
		if images[action][level] then
			self._imageFilename = images[action][level]
			return nil
		elseif images[action].default then
			self._imageFilename = images[action].default
			return nil
		end
	end

	return nil
end

function BannerTemplate:setImageWidth(width)
	self._imageWidth = width
end

function BannerTemplate:setImageTooltip(tooltip)
	self._imageCaption = tooltip
end

function BannerTemplate:renderImage()
	local filename = self._imageFilename
		or self._configObj:getMessage('image-filename-default')
		or 'Transparent.gif'
	return mFileLink.new(filename)
		:width(self._imageWidth or 20)
		:alt(self._imageAlt)
		:link(self._imageLink)
		:caption(self._imageCaption)
		:render()
end

function BannerTemplate:render()
	-- Dummy method, to be implemented by the subclasses.
	return ''
end

--------------------------------------------------------------------------------
-- Banner class
--------------------------------------------------------------------------------

local Banner = BannerTemplate:subclass('Banner')

function Banner:initialize(configObj)
	BannerTemplate.initialize(self, configObj)
	self:setImageWidth(40)
end

function Banner:setReasonText(s)
	self._reasonText = s
end

function Banner:setExplanationText(s)
	self._explanationText = s
end

function Banner:render(page)
	-- Renders the banner.
	-- The page parameter specifies the page to generate the banner for, for
	-- testing purposes.
	mMessageBox = mMessageBox or require('Module:Message box')
	local reasonText = self._reasonText or error('no reason text set')
	local explanationText = self._explanationText
	local mbargs = {
		page = page,
		type = 'protection',
		image = self:renderImage(),
		text = string.format(
			"'''%s'''%s",
			reasonText,
			explanationText and '<br />' .. explanationText or ''
		)
	}
	return mMessageBox.main('mbox', mbargs)
end

--------------------------------------------------------------------------------
-- Padlock class
--------------------------------------------------------------------------------

local Padlock = BannerTemplate:subclass('Padlock')

function Padlock:initialize(configObj)
	BannerTemplate.initialize(self, configObj)
	self:setImageWidth(20)
end

function Padlock:setImageAlt(alt)
	self._imageAlt = alt
end

function Padlock:setImageLink(link)
	self._imageLink = link
end

function Padlock:setRight(px)
	self._right = px
end

function Padlock:render()
	local root = mw.html.create('div')
	root
		:addClass('metadata topicon nopopups')
		:attr('id', 'protected-icon')
		:css{display = 'none', right = self._right or '55px'}
		:wikitext(self:renderImage())
	return tostring(root)
end

--------------------------------------------------------------------------------
-- Category class
--------------------------------------------------------------------------------

local Category = class('Category')

function Category:initialize(configObj, protectionStatusObj)
	self._configObj = configObj
	self._protectionStatusObj = protectionStatusObj
end

function Category:setName(name)
	self._name = name
end

function Category:render()
	if self._name then
		return string.format(
			'[[%s:%s]]',
			mw.site.namespaces[14].name,
			self._name
		)
	end
end

--------------------------------------------------------------------------------
-- ProtectionCategory class
--------------------------------------------------------------------------------

local ProtectionCategory = Category:subclass('ProtectionCategory')

function ProtectionCategory:initialize(configObj, protectionStatusObj, titleObj)
	Category.initialize(self, configObj, protectionStatusObj)
	self._titleObj = titleObj
end

function ProtectionCategory:render()
	local configObj = self._configObj
	local protectionStatusObj = self._protectionStatusObj
	local titleObj = self._titleObj
	
	-- Get the level and exit if the page is not protected.
	if not protectionStatusObj:isProtected() then
		return ''
	end
	
	-- Get the expiry.
	local expiry = protectionStatusObj:getExpiry()
	if type(expiry) == 'number' then
		expiry = 'temp'
	elseif expiry ~= 'indef' then
		expiry = nil
	end

	-- Get the namespace category key.
	local nskey
	do
		local namespace = titleObj.namespace
		local categoryNamespaces = configObj:getConfigTable('categoryNamespaceKeys')
		nskey = categoryNamespaces[namespace]
		if not nskey and namespace % 2 == 1 then
				nskey = 'talk'
		end
	end

	-- Get the other inputs.
	local reason = protectionStatusObj:getReason()
	local action = protectionStatusObj:getAction()
	local level = protectionStatusObj:getLevel()
 
	--[[
	-- Define the properties table. Each property is a table containing the
	-- canonical order that the property is tested in, the position the
	-- property has in the category key strings, and the property value itself.
	--]]
	local properties = {
		expiry    = {order = 1, val = expiry},
		namespace = {order = 2, val = nskey},
		reason    = {order = 3, val = reason},
		level     = {order = 4, val = level},
		action    = {order = 5, val = action}
	}
 
	--[[
	-- Apply the category order configuration, if any. The configuration value
	-- will be a property string, e.g. 'reason', 'namespace', etc. The property
	-- corresponding to that string is tested last (i.e. it is the most
	-- important, because it keeps its specified value the longest) and the
	-- other properties are tested in the canonical order. If no configuration
	-- value is specified then the canonical order is used.
	--]]
	local configOrder = {}
	do
		local reasonsWithNamespacePriority = configObj:getConfigTable('reasonsWithNamespacePriority')
		local namespaceFirst = reason and reasonsWithNamespacePriority[reason] or false
		for propertiesKey, t in pairs(properties) do
			configOrder[t.order] = t
		end
		if namespaceFirst then
			-- Swap namespace and reason around.
			local namespaceTable = table.remove(configOrder, 2)
			table.insert(configOrder, 3, namespaceTable)
		end
	end
 
	--[[
	-- Define the attempt order. Properties with no value defined are moved
	-- to the end, where they will later be given the value "all". This is
	-- to cut down on the number of table lookups in the cats table, which
	-- grows exponentially with the number of properties with valid values.
	-- We keep track of the number of active properties with the noActive
	-- parameter.
	--]]
	local noActive, attemptOrder
	do
		local active, inactive = {}, {}
		for i, t in ipairs(configOrder) do
			if t.val then
				active[#active + 1] = t
			else
				inactive[#inactive + 1] = t
			end
		end
		noActive = #active
		attemptOrder = active
		for i, t in ipairs(inactive) do
			attemptOrder[#attemptOrder + 1] = t
		end
	end
 
	--[[
	-- Check increasingly generic key combinations until we find a match.
	-- If a specific category exists for the combination of properties
	-- we are given, that match will be found first. If not, we keep
	-- trying different key combinations until we match using the key
	-- "all-all-all-all-all".
	--
	-- To generate the keys, we index the property subtables using a
	-- binary matrix with indexes i and j. j is only calculated up to
	-- the number of active properties. For example, if there were three
	-- active properties, the matrix would look like this, with 0
	-- corresponding to the string "all", and 1 corresponding to the
	-- val field in the property table:
	-- 
	--   j 1  2  3
	-- i  
	-- 1   1  1  1
	-- 2   0  1  1
	-- 3   1  0  1
	-- 4   0  0  1
	-- 5   1  1  0
	-- 6   0  1  0
	-- 7   1  0  0
	-- 8   0  0  0
	-- 
	-- Values of j higher than the number of active properties are set
	-- to the string "all".
	--
	-- A key for the category table is constructed for each value of i.
	-- The correct position of the value in the key is determined by the
	-- pos field in the property table.
	--]]
	local cats = configObj:getConfigTable('protectionCategories')
	local cat
	for i = 1, 2^noActive do
		local key = {}
		for j, t in ipairs(attemptOrder) do
			if j > noActive then
				key[t.order] = 'all'
			else
				local quotient = i / 2 ^ (j - 1)
				quotient = math.ceil(quotient)
				if quotient % 2 == 1 then
					key[t.order] = t.val
				else
					key[t.order] = 'all'
				end
			end
		end
		key = table.concat(key, '-')
		local attempt = cats[key]
		if attempt then
			cat = attempt
			break
		end
	end
	if cat then
		self:setName(cat)
	end
	return Category.render(self)
end

--------------------------------------------------------------------------------
-- ExpiryCategory class
--------------------------------------------------------------------------------

local ExpiryCategory = Category:subclass('ExpiryCategory')

function ExpiryCategory:render()
	local configObj = self._configObj
	local protectionStatusObj = self._protectionStatusObj
	
	local reasonsWithoutExpiryCheck = configObj:getConfigTable('reasonsWithoutExpiryCheck')
	local expiryCheckActions = configObj:getConfigTable('expiryCheckActions')
	local expiry = protectionStatusObj:getExpiry()
	local action = protectionStatusObj:getAction()
	local reason = protectionStatusObj:getReason()
	
	if not expiry
		and expiryCheckActions[action]
		and reason -- the old {{pp-protected}} didn't check for expiry
		and not reasonsWithoutExpiryCheck[reason]
	then
		self:setName(configObj:getMessage('tracking-category-expiry'))
	end
	return Category.render(self)
end

--------------------------------------------------------------------------------
-- ErrorCategory class
--------------------------------------------------------------------------------

local ErrorCategory = Category:subclass('ErrorCategory')

function ErrorCategory:render()
	local configObj = self._configObj
	local protectionStatusObj = self._protectionStatusObj
	
	local expiry = protectionStatusObj:getExpiry()
	local action = protectionStatusObj:getAction()
	local level = protectionStatusObj:getLevel()

	if not protectionStatusObj:isProtected()
		or type(expiry) == 'number' and expiry < os.time()
	then
		self:setName(configObj:getMessage('tracking-category-incorrect'))
	end
	return Category.render(self)
end

--------------------------------------------------------------------------------
-- TemplateCategory class
--------------------------------------------------------------------------------

local TemplateCategory = Category:subclass('TemplateCategory')

function TemplateCategory:initialize(configObj, protectionStatusObj, titleObj)
	Category.initialize(self, configObj, protectionStatusObj)
	self._titleObj = titleObj
end

function TemplateCategory:render()
	local configObj = self._configObj
	local protectionStatusObj = self._protectionStatusObj
	local titleObj = self._titleObj
	
	local action = protectionStatusObj:getAction()
	local level = protectionStatusObj:getLevel()
	local namespace = titleObj.namespace
	
	if level == 'templateeditor'
		and (
			action == 'create'
			or not (namespace == 10 or namespace == 828)
		)
	then
		self:setName(configObj:getMessage('tracking-category-template'))
	end
	return Category.render(self)
end

--------------------------------------------------------------------------------
-- ProtectionBanner class
--------------------------------------------------------------------------------

local ProtectionBanner = {}

function ProtectionBanner.exportToWiki(frame, titleObj)
	mArguments = mArguments or require('Module:Arguments')
	local args = mArguments.getArgs(frame)
	return ProtectionBanner.exportToLua(args, titleObj)
end

function ProtectionBanner.exportToLua(args, titleObj)
	titleObj = titleObj or mw.title.getCurrentTitle()

	-- Get data objects
	local configObj = Config:new()
	local protectionObj = ProtectionStatus:new(args, configObj, titleObj)

	-- Initialise the blurb object
	local blurbObj = Blurb:new(configObj, protectionObj, titleObj)
	blurbObj:setDeletionDiscussionPage(args.xfd)
	blurbObj:setUsername(args.user)
	blurbObj:setSection(args.section)

	local ret = {}

	-- Render the banner
	if protectionObj:getLevel() ~= '*' then
		-- Get the banner object
		local isPadlock = yesno(args.small)
		local bannerObj
		if isPadlock then
			bannerObj = Padlock:new(configObj)
		else
			bannerObj = Banner:new(configObj)
		end

		-- Set the image fields
		local bannerConfig = configObj:getBannerConfig(protectionObj)
		local imageFilename = bannerConfig.image
		bannerObj:setImageFilename(
			imageFilename,
			protectionObj:getAction(),
			protectionObj:getLevel(),
			titleObj.namespace,
			protectionObj:getExpiry()
		)
		if isPadlock then
			bannerObj:setImageTooltip(blurbObj:makeTooltipText())
			bannerObj:setImageAlt(blurbObj:makeAltText())
			bannerObj:setImageLink(blurbObj:makeLinkText())
		else
			-- Large banners use the alt text for the tooltip.
			bannerObj:setImageTooltip(blurbObj:makeAltText())
		end

		-- Set the text fields
		if not isPadlock then
			bannerObj:setReasonText(blurbObj:makeReasonText())
			bannerObj:setExplanationText(blurbObj:makeExplanationText())
		end

		ret[#ret + 1] = bannerObj:render()
	end
	
	-- Render the categories
	do
		local objects = {
			ProtectionCategory:new(configObj, protectionObj, titleObj),
			ExpiryCategory:new(configObj, protectionObj),
			ErrorCategory:new(configObj, protectionObj),
			TemplateCategory:new(configObj, protectionObj, titleObj)
		}
		for _, obj in ipairs(objects) do
			ret[#ret + 1] = obj:render()
		end
	end
	
	return table.concat(ret)	
end

function ProtectionBanner._exportClasses()
	-- This is used to export the classes for testing purposes.
	return {
		ProtectionStatus = ProtectionStatus,
		Config = Config,
		Blurb = Blurb,
		BannerTemplate = BannerTemplate,
		Banner = Banner,
		Padlock = Padlock,
		Category = Category,
		ProtectionCategory = ProtectionCategory,
		ErrorCategory = ErrorCategory,
		ExpiryCategory = ExpiryCategory,
	}
end

return ProtectionBanner